: :
SpicyGreenIguana  
Forum Newest Posts Userlist Archive Register
Search Forums:
»  SpicyGreenIguana » Consumer Electronics » Home cinema and HiFi  » wall fixture: My Erfarung with wall fixture Tronje "A8050"

Register FAQ Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1 ()  
Old 10-05-2008, 09:36 AM
 
Join Date: May 2007
Posts: 327
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


Hello together, I have since my LG yesterday 50 PG 6000 on the wall h X X ngen.

My load notebook (is a dipl.. Engineer. ) it looked as follows:

1. I wanted to come to the Anschl X Xsse and, besides, also what see! (this blind Rumgefummel hates behind a TV)
2. 10 cm stood off from the wall (stands thus in the manual because of W X X rmeentwicklung)
3. Absolute Verwindungssteifigkeit! The TV has to go always just h X X ngen, all the same in which position!!

however, Nobody has to go w X X re shh X Xn:
turn , incline and extendable. After I have read in various forums of fixtures to myself have easily bent, if I have immediately looked for one something can carry more than the plasma really weighs. This weighs without Fu X X 40 kg, with fu X X 43 kg.

came and the following X Xr me only one fixture with a security from min. 1,5 in asks. So approx.. 60 KG. Then I have become attentive to the Tronje A8050, which proud 85 kg can carry and fully incline , turn , tip and is extendable. I have this last week for an unbeatable price from just 163XX X incl.. versand arose.

technical data of the Tronje A8050

Full inflexion wall holder to: prefer, incline and turn
and the following X Xr flat panel displays of 32 "65"
max.. Load-carrying capacity: 85 kg
distance to the wall: 105 mm 550 mm
Lochabst X X nde: max.. 810x500mm
corresponds of the standard specifications VESA
material: Steel / aluminium
weight: 15,4 kg
dimensions (BxHxT): 870 x 524 x 105 mm
inclination corner: + / 15X X
rotary corner: + / 60X X
quick tension adjuster and the following X Xr locking
with Kabelf X Xhrung


infos of the Tornje homepage to the A8050

pictures in a Zip directly from Tornje ( www.produkt info.com / tronjeinfo / bilderHQ / A8050.scarce)

product description in PDF file ( www.produkt info.com / tronjeinfo / datenblatt / A8050.pdf)



I was only a little bit anxiously as the package it came. the cardboard looked very much taken. I thought only w X X re R X Xckl X X ufer, however, after investigation of the wall slab was clear, the fact that this was never used. No Schraubenabdr X Xcke or X X hnliches. Everything still was cleanly united X Xtet and in Saint X Xropor gedr X Xckt.

The first impression:
massif! Very much massif! I knew till then only these not tiltable fixtures from "metal" are punched. The only "metal parts" are the rails, should be screwed onto the plasma and approx.. 5 6 mm baseplate with 8x 12 mm D X Xbeln on the wall is fastened. The swivel arms have more X Xhnlichkeit with an across driver in a car! In general everything seems to be from downpour. Not free of charge only the fixture weighs 15 kg! The design is very simple and the assembly record is hidden after assembly behind a black plastic cover.

Now there came the construction:

Here already started "my" problem:
Knowing somebody Murphy? So with the law from because of "It comes always differently?" ? Only the accumulator blow drill was empty, then was not in the tool box the drill sentence, look for long one and a lot of Flucherei then I have found this. Unfortunately, only there was gr X X X Xte 10 mm, however, I needed 12 mm.... Hmpf! Then, nevertheless, I have found one more 12 mm of drill, however, unfortunately nobody stein , sonder only metal drill... HARG!!! Nat X Xrlich was still a holiday. Then I have simply prebored with the stone drills and the last rest, with the hopelessly dull one now, Metal drill out gescharbt. Nat X Xrlich was flat akku with the last 2 drillings again... Half h was not enough load ^^, thank you Murphy!!! :|

Here still is sometimes vorraus think of the people with Tronje of praising. Thanks to the drilling stencil, which I have straightened with the spirit level on the wall, if the fixture hung absolutely just in selbiger. Now some criticism of Tronje: D X Xbel are more absolutely cheap a property market Grabelltisch scrap metal. in 3 of 8 drillings the screws with turned. I have there Assembly-fixed eingef X Xllt and after drying them then screw drawn. Buys you better in the property market around that which of the brand manufacturer tilts. After now everything hung on the wall, if I have "tested" this first. I imagined: "Before I there my expensive plasma in it h X X nge, try I this share first ausXX X." To my person: 31 years, 184 cm. 92 kg. Thought, done! I have not taken off the fixture completely, because of 10 kg more ^^, and has me simply sometimes dull to this share in it hung.

held, from the Gef X X hl here nothing has also given way there. Then after this test in the selfattempt I have "ALONE" my plasma on them seemed sedate. This also is very much shh X Xn gel X Xst. Simply bissel X Xber the rails begin, slowly let down and already h X X ngt the TV on the wall (2 3 cm deep hooked). One can also raise a protection against again, however, attach this I have saved. This is simply screwed on. Is not really n X Xtig. As this then hung it was unscrewed of the Fu X X. According to instructions of the plasma I had to do this on the Bildfl X X che on a soft Oberfl X X che legenXX X Yes one. is klarXX X Going everything easily.

then test with the spirit level pointed: Whether taken off, around that tilts to the dining table bent or on the wall: the TV is always in ventures, speak h X X ngt absolutely just on the wall. Top! It gives nothing, absolutely warp resistant! One must draw the screws and the following X Xr the inclination nat X Xrlich already a little more firmly with it that of the not direction Fu X boden points. Because these nevertheless 2 clamping screws were, nevertheless, h X X lt to themselves border still in.



My result:

I am, up to D X Xbel, hard what inspires this fixture it begins. Top praise, Top processing, Top function. In spite of 50 give I can let my TV almost in 45X X corner of the wall stand off in the space. though this looks not really inspiring confidence (thus a monster of TV virtually floats in the air), however it goes. ^^ I can recommend this fixture to everybody not ready is to be paid X Xberteuerte prices in various Elktogro X Xm X X rkten. Ahalterungen in Elektrom X X rkten this weight / Verabeitungsklasse to 400XX X has cost!

assessment: very well with starlet.... up to D X Xbel ^^

processing:9,9 of 10 points (because of the bad D X Xbel)
design: 10 of 10 points
use: 9 of 10 points (An art instep lever and the following X Xr neigung w X X re shh X Xn instead of the Innensechkantschl X Xssels)

Ergebniss: 10 of 10 points (D X Xbel vernachl X X ssigt)

P.see.: I cannot make pictures because mine bubbles the Cam with in ungrain had . As soon as my devils arrangement comes, make I sometimes pictures. Because the report has landed now even on the Main page, if I have this over again X Xberarbeitet what mistake etc.. it begins . Are certainly still enough available, however is not any more so much Red unterschrichen in Word.
Reply With Quote
  #2 ()  
Old 10-18-2008, 01:46 PM
 
Join Date: Dec 2005
Posts: 132
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


Great report. Yes, I also plan my 46 customs officials to hang on the wall, but I participate there only fear he sometime runterknallt because the wall in I (approx. 35 38 kg) would like to hang only approx.. 13 cm of Dick is and also not so fantastically around holes to bore.
Reply With Quote
  #3 ()  
Old 11-17-2008, 12:28 PM
 
Join Date: Jul 2008
Posts: 352
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


nicely made with the pictures... goes faster and one does not have to do the silly advertisement of the Uploadseiten wegklicken so it should be... otherwise nice report also has before my HD fersehr ma hinzuhXngen... there this would be do not share badly
Reply With Quote
  #4 ()  
Old 11-17-2008, 06:58 PM
 
Join Date: Jun 2009
Posts: 289
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


Pity, that you not on Largely or. Use of small letters has looked and masiv one writes massively. All in all, however, completely credited.
Reply With Quote
  #5 ()  
Old 11-17-2008, 08:23 PM
 
Join Date: Oct 2007
Posts: 58
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


Pity, that you not on Largely or. Use of small letters has looked

absolutely neglectable. needs nobody mensch.
Reply With Quote
  #6 ()  
Old 11-17-2008, 08:40 PM
 
Join Date: Jun 2009
Posts: 289
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


absolutely neglectable. needs nobody mensch. , Nevertheless, for me z.B. if this is to be remained a good separation between the words around better in the text.then , Moreover, this report also comes across a little more affectionately formed .
Reply With Quote
  #7 ()  
Old 11-18-2008, 08:21 AM
 
Join Date: Sep 2008
Posts: 83
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


absolutely neglectable. needs nobody mensch.

a test report works professional, if one pays attention to the orthography.
Especially he not only has written with a small letter, but absolutely in a mess.
Reply With Quote
  #8 ()  
Old 11-18-2008, 09:34 AM
 
Join Date: Dec 2008
Posts: 1
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


Thank you, if my choice strongly influences for a new fixture.
Reply With Quote
  #9 ()  
Old 11-18-2008, 11:47 PM
 
Join Date: May 2008
Posts: 77
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


really bericht

@luluthemonkey

simply by that wound pierce and from the back over again protect. and damits so nastily does not look one can hang bild about that

had same problem, with me covers schrank 2 muttern, holds great, in spite of 7 cm wound


lg
Reply With Quote
  #10 ()  
Old 11-19-2008, 06:31 AM
 
Join Date: Nov 2007
Posts: 15
Default 

wall fixture: My Erfarung with wall fixture Tronje "A8050"


Hi, such a wall fixture is already what the fine. And I think this one there also quietly a little more money can be economical. I myself am a proud owner of the bird EFW in 6325. Really massively and everything conceals what with the connection of the fixture deals. Really practically the television after remained to turn and to incline. And the best one is... every time if I with the spirit level control the vesicle is right in the middle... COOL Something like that is important for thus Neurotiker like micht
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT. The time now is 06:49 AM.


Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.3.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82