Hi people, this Thread should help people to understand her problem, if they have the same problem like my brother.
My brother has an Asus P5Q and 2x 2 GB of GDR OCZ Platinum 2 1000 RAM for a few weeks. At least stands on the label on the bolts, but it is not right.

First once to the problem:
The calculator runs with Windows 7 without problem, boots up mostly quite normally, nothing falls, of all functioned great. However, the "blend" test in Prime95 throws immediately mistake. If the calculator runs first of all approx.. 3 hours before one Prime95 anschmeiXt, if there are no more mistakes, almost as if the RAM had to become only warm. Then on other days the calculator does not boot up any more. BIOS poses no problems, but Windows cannot start.
We thought first the bolts have a quirk. After tests with memtest86 + under DOS one of the bolts well functioned, the other brought directly mistake, all the same in which slot. we allowed to exchange the bolts, however, with the new ones everything was even worse.
I tested the bolts individually in my P5E and I had no problems. To me struck, the fact that on 2 my OCZ Platinum (also in 1000 he stuck) bolt an older label than on my newer and to those of my brother. So we exchanged the bolts and these go without problem with him.

I had the idea, that OCZ quite other chips for the bolts used than earlier. CPU Z gives a product number from according to Google to the OCZ Reaper in 1066 fits. They also have this EPP, although the Platinum might not have this.
morality of the Geschicht:
OCZ sells the Reaper 1066 bolts, in the meantime, with the Platinum Heatspreder as a Platinum 1000 bolts, which are, unfortunately, absolutely incompatible with the Asus P5Q.


Edit: Oh, has written in the heading Titanium, however, meant Platinum.

over and over again what the new.

Can this confirm then somebody? Time biology update tries? Now thus I would not generalise

I also had 2x ramsatz from ocz un with everybody I had probleme. to me does not come ocz any more in live. btw: at that time mine board was msi neo2 p35

I also had 2x ramsatz from ocz un with everybody I had probleme. to me does not come ocz any more in live. btw: at that time mine board was msi neo2 p35

I believe OCZ is allgmein quite silly

I can confirm Yes this also with my P5Q Per, OCZ Gold RAM wanted to run under no circumstances.

So with me and someone else run 2x2GB OCZ XTC Platinum, however, in 1066 he on nem P5Q Per perfectly!
however, Sometimes it helps already to put down the Latenzen of hand on the biology.

Ah, so I cannot confirm this. Has already obstructed many P5Q and OCZ Ram without Probs, however, will test sometimes perhaps these are the Latenzen.

Ah, so I cannot confirm this. Has already obstructed many P5Q and OCZ Ram without Probs, however, will test sometimes perhaps these are the Latenzen. Yes, I, nevertheless, also. But they sell, in the meantime, the OCZ Reaper in 1066 with the cheap Heatspreader and other sticker than Platinum in 1000. The real Platinum run without problems in the P5Q. It nothing helped really, I have the tension on 2.1 V put, the timing on 5 5 5 18, even Row Refresh on a value in the forum OCZ was recommended, all Asus RAM Booster things switched off... And as said, in my P5E the bolts run perfectly.

Moin

I have on meien P5Q 2x2048 OCZ Reaper HPC OCZ2RPR10662G on it and they run without problems with 1111 MHz.