Hello, I have here the following system:
AMD Athlon X2 5600 + 3,2 GHz
Abit AX78
2048 mb DDR2 MDT 800 MHz
B SHARP HD 4830
Corsair VX450W

Thus the problem is my Mainboard. I would like to update BIOS on the newest version. This should have supposedly a little bit more features in BIOS. Moreover, more CPUs are supported and chip sentence problems are repaired in Vista . Also bug-fixed are included. Therefore, I would like to update BIOS absolutely. For it I need your help. Without you I do not create it. In such a way, the first problem is, the fact that I had earlier an Asrock Mainboard and have always updated under Windows the biology. This went always easily. With Abit this is different. Though I have the Flashmenu what one under Windows can use, but already many have tried this and had at the end all one defective BIOS chip. So I must make it under DOS to menu and there the problems already start. 1. I have never made this.
2. If I do not know what I like entpacken etc.. has to go. Here is the link:
www.abit.com.tw / page / de / download / download_bios_detail.php?pFILE_TYPE=Bios&pMAIN_TYP E=Motherboard&pTITLE_ON_SCREEN=AX78&pSOCKET_TYPE=S ocket%20AM2
I have BIOS ID 12 and want to update for ID 13.
What is surer? Floppy or USB Embroidering? I would want possibly with an USB Embroidering flashen. How I make from my USB Embroidering a bootable medium?
to thanks for your answers! I would be glad very much if you could help with.
Achja still what: Anyhow I cannot reach the forum from abit. Firefox announces to me always the side too long needs. With opuses has also tried ichs. Is somebody able to do of you on the side of the Abit forum? So I not , but I would have read on there...

Hello

bezXgl. update under DOS I have jetz also no tip
for you, if I myself have never made something like that.I never, however, had problems with the Abitflash programme, this clapped always exemplarily. Who had then there problems with? Certainly also properly
have served?

Hello, a Bootdisk under Windows / Vista provide

EVERYTHING visible up to "Command.com" extinguish, otherwise does not go BIOS file on disk
BIOS file rename as "M13.am"
now dises copy on disk and "AWDFLASH.EXE"

with this Bootdisk begin the PC

A:\

awdflash M13.am / Sn/py

give ("Y" now is "Z" key)

about 1min.. wait, until the Flashprogramm is finished

NOTHING AM COMPUTER MAKE TO THE FLASHPROGRAMM FINISHED IS!

There is given the tip in the rest kind mostly "F1"

in BIOS BIOS on "default" put PC anew your settings start in BIOS carry out

Hello, thank you for the answers.@Hanne
Having you also an Abit AX78? Or are these instructions a general one?
Your instructions are with a Floppy or? By the way, I have Windows XP per SP2. I had to uninstall my Vista because of the problems . How do I make my disk bootable?
to thanks schonmal you are great!

www.biosmods.com / download / bootdisk / drdos703.exe
download, Disk in the disk drive, then the Zipdatei entpacken and from the folder "m706a13"
the files on the disk copy, without folder on top on, then from the disk boot up and runme.asked give. Easier it does not go, must only pay attention the stream does not precipitate and in the biology put, should be booted up by disk. After the Flashen separate the calculator from the stream and CmosClear make, then restart and put the biology, if is a default of Abit and should be considered, has not often enough had Probs if the CmosClear was made. anus BIOS updated, row off the power cord and then clear the CMOS data via jumper before restarting system please. All files should fit on the disk, needs nothing extinguish.

Disk in the disk drive under Windows / Vista

job / floppy disk drive with the right mouse key click format


provide "DOS MS start disk"



afterwards up to Command.com everything again extinguish biology on disk copy / AWDFLASH
copy and then as before described go forward

autoexec.asked you can leave open and extinguish everything in it and afterwards

awdflash M13.am / Sn/py/R (which "R" (REBOOT) do not forget)

put down now the Flashen is "automated"

so make I ALL biology updates under Windows too unsafe

Nevertheless, he needs nothing of hand write, if he packs all files from the folder on the disk and runme.asked types, if he also needs to rename nothing or extinguish, if he uses the DrDos disk, then everything also goes automatically and Dr..Dos also loads no unnecessary drivers, they fill the memory. Never had with the method with Abit Boards problems and I had some.

Hey, thank you you both that you help me. Really nicely from you. The process manner from "werkam" is a little easier for me than those of Hanne. What this is drdos703.exe for what do I need this? Of it nothing is explained on the side by Abit. If I have to go only runme.did ask type? Nothing something so like "A:> runme.did ask" or such a thing similar? If I have the biology geflasht, when do I know that I the calculator about the stream should take? Does this stand there? Should I separate him in the running company from the stream?
to thanks for your help. And sry because of many questions. I simply want to make sure... Achja still what: Should I rather bring as a precaution the processor on standard tact? Not with it there is a mistake...

If it seems easier for you, machs as well as @werkam has written the PC you must start only anew not from the stream net take in BIOS BIOS in BIOS on default put PC anew start in BIOS and your settings carry out ready

The DrDos.exe provides on disk a bootable start disk, just as it also Vista with provide to the start disk makes. having to do I separate him in the running company from the stream? No, only not. If the Flashvorgang is ready, if a window comes, they can switch off the calculator now (however, in in English, please Reboot or so similarly). My experiences with Abit Boards have proved, it is better, to extinguish the Cmos and then to restart only and biology on default values puts, restart and then anew put. But this must decide everybody itself.